In this video, Glenn Watt walks you through installing a pre-wired magnetic pickup harness, in this case the “Florentine Screamer” sold by C. B. Gitty Crafter Supply. While the video only shows that specific harness, the methods could easily be used to install other such harnesses that include a pickguard/cover plate. If you have been wanting to take the plunge into using a magnetic harness in a cigar box guitar build, take a look!
One-Hand Dan Russell shows you how to play the good ole R. L. Burnside tune, Coal Black Mattie. This is a nice easy one to get down on the 3-string Open G GDG cigar box guitar, so have a go at it and you’ll be rocking out the blues in no time!
If you have ever wanted to learn how to easily play some of the most famous and recognizable blues riffs and turnarounds on your cigar box guitar, this video series is for you! Shane Speal sits down with his video camera and a 3-string cigar box guitar (tuned to Open G GDG), and walks you through five of the best-known blues riffs that we’ve all heard hundreds of times. Each lesson is just a few minutes long – you’ll be belting out the blues in no time!
At the 2015 Winter NAMM show in Anaheim, CA, Shane Speal had a chance to talk to George Benson about his first guitar. Turns out, George and his father built it themselves out of spare parts! While it didn’t involve a cigar box, this is a great example of a now-famous musician getting his start with homemade/handmade instruments. If you can’t afford one (or even if you can), build your own!
In this 10-minute video, Glenn Watt walks you through every step of installing a P90-style soap bar pickup in your neck-through cigar box guitar. P90’s have an almost mythic reputation and a cult-like following for their tone and sound, and they sound absolutely awesome in cigar box guitars.
In this video, CBG craftsman Glenn Watt shows us how to install a basic pre-wired piezo & jack harness (such as C. B. Gitty’s product #50-014-01) in your cigar box guitar. It really is that easy to electrify your homemade instrument!
In this video how-to, Glenn Watt walks you through a great way to add fret position markers your cigar box guitar fretboard using wooden dowels. While a lot of folks are happy with just using a Sharpie or woodburning fret marks into their fretboard, using inset fret markers looks really good and definitely can give a build a more professional look. If you’ve consider it but thought it too hard or too much effort, think again! Glenn shows you just how quickly you can add this great feature to your next build.
Glenn Watt recently created a great how-to video walking you through how to create a scarf joint on a cigar box guitar neck. A scarf joint is a special angled cut which, when glued back together, angles the headstock away from the fingerboard surface of the neck at a specified angle (usually about 15 degrees). Having the headstock angled like this makes it easier to get the strings to stay tight against the nut (this is referred to as the “break angle” of the strings).
So check this video out, and give a scarf joint a try on your next build. It does take some care and attention to detail to make one, but it is well worth the effort!