Glenn walks you through how he installs the mini humbucker pickup in the “Mi Amor” cigar box guitar he designed for C. B. Gitty.
How I Took This Cigar Box Guitar to a Whole New Level
The Mi Amor meets the Snake Oil Humbucker: A Killer Combo
It sounds raw and dirty.
A single coil pickup in a cigar box guitar has grit and a surly swagger. But for this build, the sound of a solitary single coil pickup is missing something.
When designing the Mi Amor – a recent addition to the C.B. Gitty line of guitars – I wanted it to have a big punch. Picture a cinder block-sized fist, wearing brass knuckles, being thrown into your gut. You know, really taking the air out of you.
This illustrated guide written by Glenn Watt walks you through how to install the C. B. Gitty Part number 54-020-01, “Pre-Wired 4-String Single Coil Pickup Harness with Volume and Tone.” Cutout and drill bit sizes are given and the steps clearly shown for mounting one of these handy pre-wired pickup harnesses into cigar box guitars.
The principles in this guide can also be used for most any single-coil or humbucker pickup with a neck-through cigar box guitar, where you often have to notch down into the neck (and brace underneath it) to get the pickup into place.
So you want to hear that new gitty you’re building through your amplifier that’s been sitting unused behind the holiday decorations in the basement? Do you want to make certain that you can crank that little bad rabbit when everyone leaves and you’re left to your own devices in a quiet home? Or maybe you’re looking to level-up and retro-fit a pickup into a guitar you already have that’s been sorely needing a little volume. In the Pre-Wired Piezo and Jack Harness from C.B. Gitty you have the simplest way to electrify your instrument with the most basic of installation requirements.